Please find below Configuration details for ITSP Telephony Service.
Linksys PAP2 setup
The Linksys Phone Adapter enables use of our high-quality
feature-rich telephone service through your cable or DSL Internet
connection. Just plug it into your home Router or Gateway and use
the two standard telephone jacks to connect your existing phones.
Each phone jack operates independently, with separate phone service
and phone numbers -- like having two phone lines. With ITSP you'll
get clear telephone reception, even while using the Internet at the
same time for normal data operations.
|
STEP 1
You must first determine what IP address it received. To do
this, you need to pick up the phone attached to the Line 1
jack and
dial: **** (four asterisks)
then dial: 110 #
and you will be told the IP address of your device (e.g.
192.168.0.100). |

|
STEP 2
Go to any browser equipped computer on your network and
enter the address:
http://<IP ADDRESS>/
(where <IP ADDRESS> is replaced by the address that was
given to you in STEP 1. |

|
STEP 3
Click on the "Admin Login" button near the top right side of
the screen, then click on the "Line 1" tab.
 |

|
STEP 4
You need to modify only a few parameters from the factory
default. They are listed here: |
|
Proxy:
|
Sip.itsp.biz |
|
Display Name:
|
Enter
your full name, this will show up as part of your callerid. |
|
User ID:
|
Enter
the phone number you chose when you signed up for ITSP.biz
service. |
|
Password:
|
Enter
the password that you chose when you signed up for Itsp.biz
service. |
|
Register Expires: |
3600 |
|

|

|
STEP 5
To save bandwidth, you can change Line 1 "Preferred Codec"
to G729a. Also change the "Use Pref Codec Only" to No. You
can only do this for one line. So, if Line 1 is on G.729a,
Line 2 has to be some other codecs. We do not support G.723.
 |

|
STEP 6
Click on the "Save Settings " button at the bottom of the
form. |
 |


"Linksys-ip-address"
is the IP address you receive when dialing **** and 110 when
prompted. The device will speak the IP address you need to insert.
|